Vapor Pressure Testing


Vapor Pressure Testing

Meet NDIC Rule Order 25417 with Precision Analysis Mobile Vapor Pressure Testing Lab.

  • Get Vapor Pressure test results next day.
  • No extra costs for driving samples to a lab.
  • No shipping charges.
  • No oil disposal charges.
  • Daily quality control.
  • Worry free project management. Our project manager makes sure your Vapor Pressure testing is done on a quarterly basis for all assigned sites.
  • Technicians are already in your area ready to perform Vapor Pressure sampling and testing.
  • Sampling is done according to ASTM D3700.
  • Testing is performed to ASTM D6377.

To schedule Vapor Pressure sampling and testing contact:

Ali Kinter, Project Manager
Cell: 970-342-6697
Office: 970-460-0055

Under Rule Order 25417, North Dakota / Bakken producers must make sure that the Vapor Pressure of their crude oil is less than 13.7 psi prior to transport after April 1, 2015.

Recent developments have put crude oil transportation into public spotlight in the United States and Canada. The US Department of Transportation (DOT) has issued an Emergency Testing Order that requires all shippers to test crude oil from the Bakken region to ensure the proper characterization of the crude oil before it is transported by rail.


The proper testing of crude oil vapor pressure is critical for meeting Hazardous Material Regulations and in determining the requirements for safe packing for transport. The risk of pressure build up inside a rail car and crude oil boil increases significantly if the crude oil includes volatile components. In the discussion that follows, the term volatile components is used for crude oil components with a high tendency to evaporate, such as dissolved hydrocarbon gases, air or liquid components that begin to evaporate at a low temperature. When testing crude oil samples, it is of utmost importance that the sample is properly handled to keep the volatile light ends in the crude oil prior to vapor pressure testing. Crude oils may be misclassified if hydrocarbon volatiles are allowed to evaporate prior to sampling.

If the sample is measured from an unsealed bottle, there is a risk that the actual vapor pressure of the crude oil inside the rail cargo will end up being significantly higher than the test results suggest. For best accuracy, therefore, it is important to make certain the crude oil sample is tested “as is”, including all the volatile components.

Get the Most Accurate Test Results

Precision Analysis ensures the crude oil sample is pressurized when the sample is tested in the laboratory. We do this by providing trained and certified crude oil sample collectors who use highly specialized pressurized containers called floating piston cylinders (FPC). Precision Analysis uses FPC’s because there is a noticeable difference in the vapor pressure when crude oil is delivered in a pressurized floating piston cylinder versus a bottle. This will ensure the volatile light ends will be present during vapor pressure testing, providing you with the most accurate test results.

We do it all. We do it everywhere. We do it fast.

Precision Analysis is your One-Stop-Shop. Call Precision Analysis for all your Laboratory and On-Site testing and measurement needs.

Request Service

Contact Information

Precision Analysis
(866) 985-0866
Click Here to See Our Locations

NELAP Accredited

NELAP Accredited

EPA Certified

NELAP Accredited